ChirpStack Setup

Follow install instructions: https://www.chirpstack.io/docs/getting-started/debian-ubuntu.html

Set configurations

For /etc/chirpstack-gateway-bridge/chirpstack-gateway-bridge.toml:

root@chirpstack:/etc/chirpstack-gateway-bridge# cat chirpstack-gateway-bridge.toml 
# This configuration provides a Semtech UDP packet-forwarder backend and
# integrates with a MQTT broker. Many options and defaults have been omitted
# for simplicity.
#
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
# configuration example and documentation.


# Gateway backend configuration.
[backend]
# Backend type.
type="semtech_udp"

  # Semtech UDP packet-forwarder backend.
  [backend.semtech_udp]

  # ip:port to bind the UDP listener to
  #
  # Example: 0.0.0.0:1700 to listen on port 1700 for all network interfaces.
  # This is the listener to which the packet-forwarder forwards its data
  # so make sure the 'serv_port_up' and 'serv_port_down' from your
  # packet-forwarder matches this port.
  udp_bind = "0.0.0.0:1700"


# Integration configuration.
[integration]
# Payload marshaler.
#
# This defines how the MQTT payloads are encoded. Valid options are:
# * protobuf:  Protobuf encoding
# * json:      JSON encoding (easier for debugging, but less compact than 'protobuf')
marshaler="protobuf"

  # MQTT integration configuration.
  [integration.mqtt]
  # Event topic template.
  event_topic_template="us915_0/gateway/{{ .GatewayID }}/event/{{ .EventType }}"

  # Command topic template.
  command_topic_template="us915_0/gateway/{{ .GatewayID }}/command/#"

  # MQTT authentication.
  [integration.mqtt.auth]
  # Type defines the MQTT authentication type to use.
  #
  # Set this to the name of one of the sections below.
  type="generic"

    # Generic MQTT authentication.
    [integration.mqtt.auth.generic]
    # MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
    server="tcp://127.0.0.1:1883"

    # Connect with the given username (optional)
    username=""

    # Connect with the given password (optional)
    password=""

For /etc/chirpstack/chirpstack.toml:

root@chirpstack:/etc/chirpstack# cat chirpstack.toml
# Logging.
[logging]

  # Log level.
  #
  # Options are: trace, debug, info, warn error.
  level="info"


# PostgreSQL configuration.
[postgresql]

  # PostgreSQL DSN.
  #
  # Format example: postgres://<USERNAME>:<PASSWORD>@<HOSTNAME>/<DATABASE>?sslmode=<SSLMODE>.
  #
  # SSL mode options:
  #  * disable - no SSL
  #  * require - Always SSL (skip verification)
  #  * verify-ca - Always SSL (verify that the certificate presented by the server was signed by a trusted CA)
  #  * verify-full - Always SSL (verify that the certification presented by the server was signed by a trusted CA and the server host name matches the one in the certificate)
  dsn="postgres://chirpstack:chirpstack@localhost/chirpstack?sslmode=disable"

  # Max open connections.
  #
  # This sets the max. number of open connections that are allowed in the
  # PostgreSQL connection pool.
  max_open_connections=10

  # Min idle connections.
  #
  # This sets the min. number of idle connections in the PostgreSQL connection
  # pool (0 = equal to max_open_connections).
  min_idle_connections=0


# Redis configuration.
[redis]

  # Server address or addresses.
  #
  # Set multiple addresses when connecting to a cluster.
  servers=[
    "redis://localhost/",
  ]

  # Redis Cluster.
  #
  # Set this to true when the provided URLs are pointing to a Redis Cluster
  # instance.
  cluster=false


# Network related configuration.
[network]

  # Network identifier (NetID, 3 bytes) encoded as HEX (e.g. 010203).
  net_id="000000"

  # Enabled regions.
  #
  # Multiple regions can be enabled simultaneously. Each region must match
  # the 'name' parameter of the region configuration in '[[regions]]'.
  enabled_regions=[
    "as923",
    "as923_2",
    "as923_3",
    "as923_4",
    "au915_0",
    "cn470_10",
    "cn779",
    "eu433",
    "eu868",
    "in865",
    "ism2400",
    "kr920",
    "ru864",
    "us915_0",
    "us915_1",
  ]


# API interface configuration.
[api]

  # interface:port to bind the API interface to.
  bind="0.0.0.0:8080"

  # Secret.
  #
  # This secret is used for generating login and API tokens, make sure this
  # is never exposed. Changing this secret will invalidate all login and API
  # tokens. The following command can be used to generate a random secret:
  #   openssl rand -base64 32
  secret="theChirpthing!."


[integration]
  enabled=["mqtt"]

  [integration.mqtt]
    server="tcp://localhost:1883/"
    json=true

4.5 KiB Raw Blame History

ChirpStack Setup

4.5 KiB

Raw Blame History