36 lines
1.3 KiB
Markdown
36 lines
1.3 KiB
Markdown
# Raspberry Pi Setup
|
|
|
|
Download the [Raspberry Pi Imager](https://flathub.org/apps/org.raspberrypi.rpi-imager) from Flathub (or elsewhere)
|
|
|
|
Download Raspberry Pi OS Lite 64-bit from the [Raspberry Pi download page](https://www.raspberrypi.com/software/operating-systems/)
|
|
|
|
Open the imager and do the following:
|
|
|
|
- Choose custom image (at the bottom)
|
|
- Pick the OS file you downloaded
|
|
- Choose your SD card for storage
|
|
- Click the gear icon for settings
|
|
- Set hostname, enable SSH, set username/password, set WiFI as desired
|
|
- Click image
|
|
|
|
Once writing is done, put the SD card in and start up the Pi. Wait a minute for it to start and join the network.
|
|
|
|
Find the IP address of the Pi via your router (look for DHCP leases) and SSH in.
|
|
|
|
|
|
|
|
Change the IP address to be static by adding the following to the bottom of `/etc/dhcpcd.conf` (modify for your own environment, using `eth0` for wired):
|
|
|
|
```conf
|
|
interface wlan0
|
|
static ip_address=192.168.0.181
|
|
static routers=192.168.0.1
|
|
static domain_name_servers=192.168.0.1
|
|
```
|
|
|
|
Update, upgrade, and install Git: `sudo apt update && sudo apt -y upgrade && sudo apt install -y git`.
|
|
|
|
Reboot and SSH in to the new static IP you assigned.
|
|
|
|
The Pi is ready for the packet forwarder to be installed.
|